How to reduce the failure of the stacker in the operation process?

Although modern stacking machines already have very high performance, not only stacking efficiency is high, but stacking effect is good, even stacking different kinds of products at the same time. But a good product can't be perfect. There will be some malfunctions in operation due to negligence or other reasons. Automatic stacking machine will also be so. In order to reduce the probability of the stacker in the process of operation, we must do the following.

First of all, in order to reduce the failure of the stacker, it is necessary to detect the stacker before the formal operation. If the newly purchased stacker is necessary for trial operation, it will ensure palletizing operation without any problems. Secondly, the fundamental need to be transported or palletizing products of different parameters to set stacker above, automatic stacking machine although does not need people to operate, but the premise is to set up the parameters, and these parameters must be consistent with the required stacking commodity demand.

Furthermore, although the automatic stacking machine, but this product also supports manual operation, in some circumstances necessary to reduce probability of failure by manual operation, for example, packaged with insufficient length and don't know what causes this situation, you can choose manual belt.

Of course, in addition to the above problems, to reduce the failure of stacker during operation, also need to pay attention to many problems, if there is a problem once code need to switch off the power supply, and find a professional member of the people were detected in did not detect the problem, not completely solve the problem before don't start again.