linkman：Anny Wang / Victor Zhang
phone：+86-13811440176 / +86-13811939175
address：37#Cangyuan Street,Jizhou District,Tianjin City,China
email：email@example.com / firstname.lastname@example.org
In the current trend of economic development, it is necessary to know and recognize the binding machine to a certain extent, whether it is operating using a binding machine or a bookbinding machine. Due to the variety of current bookbinding machines, the functions of all kinds of bookbinding machines are also quite different in order to meet the needs of current personalized printed and post press technology.
In the common binding machine, the hot-melt bookbinding machine and the wireless glue packing machine have become the latest binding methods of all kinds of soft cover album, manuals, bidding books, telephone books and catalogues. Then how to use the bookbinding machine? Below, the small editor for a simple introduction of the common bookbinding machine operation method for everyone to refer to.
Precautions for the binding machine:
1. mounting handle: put the handle with the box into the right side of the binding machine (notice: the working angle of the handle) tighten with the handle screw
2. paper quantity: it must be determined according to the amount of paper specified in the instructions of each model, and cannot be overdose. Otherwise, it may lead to the following bad conditions: the handle can not be pressed down, the paper barrier, can not penetrate.The margin is not balanced, and the paper side roll angle is easy to occur. The twisting or breaking of the square shaft leads to the shortened service life of the binding machine.
3. the adjustment of the margin of the paper: the size of the margin is determined according to the diameter of the ring. Adjust the scale to adjust the margin. The diameter of the drawing circle is large, the margin of the paper is adjusted, the diameter of the drawing circle is small, and the margin of the paper is small.
4. drilling operation method: the paper is tidy, close to the positioning block, the paper is sent into the machine, the top is in place. Hold the paper with the left hand, hold the handle in the right hand, press down to the blade and penetrate the paper, and then lift the handle. Smooth hands will be taken out of the paper, such as the appearance of paper, repeat the handle press down, and then up to the position of the paper can be taken out.
5. rubber ring bookbinding method: according to the amount of paper, choose different size aprons, will handle slowly upwards to push the ring open, then the paper tooth hole into the apron, the handle slowly pulled back, let the pull ring gear is inserted into the hole after all the paper, will pull the handle in place, tighten the apron, binding it was finished.
Copyright © 2018-2019 beijingrunda.com Beijing Runda Machinery Manufacture Co., Ltd